Anterior Después
INFORMACIÓN DEL ARTÍCULO
Lectura métrica
9,680 Horas
N.º de serie
(no bucket)stick length 13'3", aux-hyd, shoe width 36", cab-heat, Isuzu 6 BR11 type II engine, Loose Attachments: Stanley MB70E hammer att.

Informe de inspección



Tenga en cuenta que, como comprador, debe revisar todo el informe de inspección al evaluar los artículos.
Resumen Incluye un certificado de condición del equipo de Garantía IronClad® Incluye un certificado de condición del equipo de Garantía IronClad®®
This machine appears to be in poor overall condition. The hydraulics perform poorly, the undercarriage and chassis could use attention. The sheet metal has damage and the finish is poor.


Apariencia general
Descripción Clasificación Detalles  
cab/operator station Several cab and door glass windows have been replaced with Plexiglas panels that are cloudy and blurred making it difficult to see through and the upper windshield is missing. Haga clic aquí para abrir las fotografías y vídeos de este artículo.  
sheet metal (fiberglass) condition The right and left catwalks are damaged, the left rear cab structure is dented, the steps and handrails are bent, the swing motor inspection cover panel is damaged, the counterweight area is scratched and scraped, there are dents and scratches throughout, and there are many rust spots in the paint loss areas. Haga clic aquí para abrir las fotografías y vídeos de este artículo.  
paint The paint and decals are worn and faded. Haga clic aquí para abrir las fotografías y vídeos de este artículo.  
(3)


Operator Station
Descripción Clasificación Detalles  
steps/ladders The steps are damaged.
hand rails Haga clic aquí para abrir las fotografías y vídeos de este artículo.  
mirrors N/A - The mirrors are missing.
glass The upper windshield is missing and several glass panels have been replaced with Plexiglas that is cloudy and difficult to see through. Haga clic aquí para abrir las fotografías y vídeos de este artículo.  
seats/armrests The cushions are torn and the seat pedestal is loose and not properly secured.
seat belts
exterior lights INOPERABLE - The lights are inoperable and the right unit is missing. Haga clic aquí para abrir las fotografías y vídeos de este artículo.  
horn INOPERABLE
warning lights/alarms INOPERABLE
safety alarms INOPERABLE
oil pressure Warning light
gauges INOPERABLE
hour meter operational? Yes
heater INOPERABLE - The heater hoses are cut at the block.
hydraulic controls The swing function is extremely slow.
powertrain controls The control is loose.
control lock lever Undetermined - The control linkage is not in the cab.
limited function check The main components and controls could use attention.
(3)


Engine
Descripción Clasificación Detalles  
hour meter 9680
make & model Isuzu 6 BR11 type II Haga clic aquí para abrir las fotografías y vídeos de este artículo.  
serial # Data plate not visible
emission control label None seen
fuel type Diesel
starter
battery The batteries required a jump start. They would not restart the machine.
turbocharger
exhaust system
cylinder head gasket Leaking
oil dipstick tube & bonnet
blowby (checked at idle) Minor
valve cover gasket Leaking
oil pan & gasket Leaking
injector pump Haga clic aquí para abrir las fotografías y vídeos de este artículo.  
fuel lines & injector leaks None seen
water pump
radiator The cooling fins are clogging with dirt. Haga clic aquí para abrir las fotografías y vídeos de este artículo.  
limited function check The engine started with a jump start and ran well with no abnormal noises. The engine would not restart without a jump. The front cover is leaking.
(3)


Powertrain
Descripción Clasificación Detalles  
drive/propel motors
final drives Haga clic aquí para abrir las fotografías y vídeos de este artículo.  
limited function check The powertrain functioned well when checked without a load. The travel speed slows when swinging the turntable while moving forward or backward.
(1)


Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Descripción Clasificación Detalles  
boom & stick condition The boom and the stick have been plated. The stick is plumbed for auxiliary hydraulics. Haga clic aquí para abrir las fotografías y vídeos de este artículo.  
pins & bushings on boom & stick Excessive wear throughout Haga clic aquí para abrir las fotografías y vídeos de este artículo.  
stick length 13' 3" Haga clic aquí para abrir las fotografías y vídeos de este artículo.  
roller frame Haga clic aquí para abrir las fotografías y vídeos de este artículo.  
turn-table bearing Excessive play Haga clic aquí para abrir las fotografías y vídeos de este artículo.  
bottom covers The covers are bent and several are missing. Haga clic aquí para abrir las fotografías y vídeos de este artículo.  
limited function check The main chassis components performed well when checked without a load. Plates are welded to the top and bottom of the boom and stick. Haga clic aquí para abrir las fotografías y vídeos de este artículo.  
(7)


Hydraulics
Descripción Clasificación Detalles  
pumps Leaking Haga clic aquí para abrir las fotografías y vídeos de este artículo.  
valves Leaking Haga clic aquí para abrir las fotografías y vídeos de este artículo.  
hoses There are multiple hose leaks. Some hoses appear to have been recently replaced. Haga clic aquí para abrir las fotografías y vídeos de este artículo.  
swing motor The swing motor performs sluggishly. The travel speed declines when moving the turntable while traveling forward or backward. Haga clic aquí para abrir las fotografías y vídeos de este artículo.  
cylinders All of the cylinders leak and the stick cylinder rod is scratched. Haga clic aquí para abrir las fotografías y vídeos de este artículo.  
cylinder pins and bushings Moderate wear Haga clic aquí para abrir las fotografías y vídeos de este artículo.  
limited function check The hydraulic system was sluggish in operation and could use attention. Haga clic aquí para abrir las fotografías y vídeos de este artículo.  
(7)


Undercarriage
Undercarriage wear percentages are estimated averages only. These percentages are based on the average measurements of the undercarriage components and may vary due to the machine application, brand of parts, or OEM specifications available.
Descripción Clasificación Detalles  
track tensioners
shoe width 36" - Many of the track shoes are loose and/or bent. Haga clic aquí para abrir las fotografías y vídeos de este artículo.  
overall width of tracks (outside to outside of track shoes) 12' Haga clic aquí para abrir las fotografías y vídeos de este artículo.  
grouser height 17mm Haga clic aquí para abrir las fotografías y vídeos de este artículo.  
pins and bushings rotated No
track link height 33mm Haga clic aquí para abrir las fotografías y vídeos de este artículo.  
pins & bushing wear (internal) 34 3/8"
pins & bushing wear (external) Undetermined
carrier rollers 141mm
track rollers Left side-190mm; Right-183mm.
front idler height 26mm Haga clic aquí para abrir las fotografías y vídeos de este artículo.  
sprockets Some teeth are broken. Haga clic aquí para abrir las fotografías y vídeos de este artículo.  
limited function check The undercarriage components could use attention. The undercarriage wear percentages are not available for this machine. Actual measurements are given.
(6)


Specialty Equipment
Descripción Clasificación Detalles  
bucket N/A - The machine is equipped with a Stanley MB70E hammer. It is detached from the unit and may not be complete, operable, and ready to work. Haga clic aquí para abrir las fotografías y vídeos de este artículo.  
(1)


Fotos adicionales
(31)
 

Análisis de muestra de aceite
  engine hydraulic
date of analysis Oct 16, 2002 Oct 16, 2002
analysis by Spectro Spectro
Tin 4 PPM 1 PPM
Chromium 2.1 PPM 0.3 PPM
Copper 7 PPM 30 PPM
Nickel 0.8 PPM 0 PPM
Lead 14 PPM 0 PPM
Magnesium 492 PPM 85 PPM
Water 0 % 0 %
Silver 0 PPM 0 PPM
Iron 66 PPM 12 PPM
Silicon 20 PPM 6 PPM
Sodium 3 PPM 3 PPM
Aluminum 10 PPM 1 PPM
Glycol N N
Disputas:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment's major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.